concrete and quarry dust and journal

Sucessful Case

Read More
  • Use of Quarry Dust to Replace Sand in Concrete An

    2021-6-4 · Abstract- This experimental study presents the variation in the strength of concrete when replacing sand by quarry dust from 0% to 100% in steps of 10%. M20 and M25 grades of concrete were taken for study keeping a constant slump of 60mm. The compressive strength of concrete cubes at the age of 7 and 28 days were obtained at room temperature. Also the temperature 100oCeffect on concrete cubes at on 28th day of casting was carried out to check the loss of strength. From test results it was found that the maximum compressive strength is obtained only at 50% replacement at room temperature and net strength after loss due to hike in temperature was above the recommended strength value due to 50% replacement itself. This result gives a clear picture that quarry dust can be utilized in concrete Analysis of Concrete Made from Quarry Dust IJERT,2019-7-1 · considerable amount of quarry dust is composed. In this analysis, the experiment work is performed by using cement, fine aggregate, coarse aggregate, quarry dust. The examples were casted for M25 grade of concrete by supplanting the cement 0%, 5%, 10%, 15% and 20% by quarry dust and tested for workability by slump test,

  • Partial Replacement of Sand by Quarry Dust in Concrete

    2021-6-4 · investigated the partial replacement of sand with quarry dust. Initially cement concrete cube was studied with various proportions of cement concrete + quarry dust (M 20, AND M25). The experimental results showed that the addition of quarry dust as fine aggregate ratio of 30%, 40% and 50% was found to enhance the compressive properties.Partial Replacement of Sand by Quarry Dust in Concrete,Quarry dust can be defined as residue, tailing or proportions of cement concrete + quarry dust (M 20, AND M25). other non-voluble waste material after the extraction and The experimental results showed that the addition of quarry dust processing of rocks to form fine particles less than 4.75mm. as fine aggregate ratio of 30%, 40% and 50% was found to enhance the compressive properties.

  • (PDF) Use of Quarry Dust to Replace Sand in Concrete

    This experimental study presents the variation in the strength of concrete when replacing sand by quarry dust from 0% to 100% in steps of 10%. M20 and M25 grades of concrete were taken for study keeping a constant slump of 60mm. The compressiveProperties of Micro Fine Quarry Dust Concrete,2017-10-17 · While, Quarry dust (QD) defined as the material less than 4 mm machine. *Corresponding author: Nur Hanani Abdul Rahim E-mail: [email protected] in size used in construction industry [5]. QD have been used as a replacement in concrete either as a sand or aggregate replacement. According to [6] the quarry waste was used as an

  • [PDF] Use of Quarry Dust to Replace Sand in Concrete

    This experimental study presents the variation in the strength of concrete when replacing sand by quarry dust from 0% to 100% in steps of 10%. M20 and M25 grades of concrete were taken for study keeping a constant slump of 60mm. The compressive strength of concrete cubes at the age of 7 and 28 days were obtained at room temperature.Stone Dust in Concrete: Effect on Compressive Strength,2017-8-24 · found that the compressive and flexural strength of concrete made of Quarry Rock Dust are nearly 10% more than the conventional concrete (Suribabu et al., 2015). In the present study it is proposed to investigate the optimum replacement of river sand with stone dust for concrete in term of compressive strength performance at 7 days and 28 days. II.

  • USE OF QUARRY DUST IN CONCRETE AS REPLACEMENT

    2018-10-3 · Quarry dust is an alternate material of sand which is use in construction work. Quarry dust is produced from crusher unit and each crusher unit is produced nearly 22% to 27% of dust. This dust is completely waste material for crusher unit but quarry dust is useful for construction work as sand. If we mix quarry dust in sand then only 65% to 75% of sand replaced by quarry dust because strength of concrete is affected by this process. In other process if we mix quarry dust and fly ash are added together in concrete mix then we replace complete sand by quarry dust and fly ash. The use fly ash in concrete is desirable because of benefits such as useful disposal of by a by-product, increased workability, reduction of cement consumption, increased sulphate resistance, increased resistance to alkali silica reaction decreased permeability. Therefore the concurrent use of quarry dust and fly ash in concrete Use of Quarry Dust to Replace Sand in Concrete An,2021-6-4 · International Journal of Scientific and Research Publications, Volume 3, Issue 12, December 2013 1 ISSN 2250-3153 ijsrp Use of Quarry Dust to Replace Sand in Concrete An Experimental Study

  • Partial Replacement of Sand by Quarry Dust in Concrete

    2021-6-4 · International Journal of Scientific and Research Publications, Volume 5, Issue 7, July 2015 2 ISSN 2250- 3153 ijsrp TThis test will be done for conducted for concrete cubes of 30% then 40% and 50% replacement of sand by Quarry dust forSustainable Utilisation of Quarry Dust Waste in ,2020-12-1 · Therefore, this research was to observe the possibility of quarry dust to be included in a concrete mix. The quarry dust has been used as a partial replacement for cement proportion at different levels of replacement (25%, 30% and 35%). Quarry dust was used as the main material in this project to measure the effectiveness of concrete performance.

  • Influence of Quarry Dust on Compressive Strength of

    Objectives: In the present study, by-product of stone crushed, quarry dust is replaced as a fine aggregate with 20%, 30%, 40%, 50% replacement.Methods/Analysis: The fine aggregate is being replaced with fine aggregate and the compressive strength is determined for the concrete by testing the sample cube. The properties such as the specific gravity, fineness modulus, moisture content etc. are(PDF) Use of Quarry Dust to Replace Sand in Concrete ,A. Mix proportioningTwo grades of concrete M20 and M25 having nominal mix proportion of 1:1.5:3 and 1:1:2 respectively were used by weight and w/c ratio was fixed according to the slump requirement of 60mm. For this concrete mix, quarry dust was added for replacement of

  • “REPLACEMENT OF SAND BY QUARRY DUST IN CONCRETE”

    2021-5-13 · cement concrete +quarry dust (M20 & M25). The experimental result showed that the additional of quarry dust as fine aggregate ratio of 30%, 40% and 50% was found to enhance the compressive properties. The compressive strength of concrete cubes at the age of 7 and 28 days were obtained at room temperature.Experiment on Foam Concrete with Quarry Dust as Partial,2019-7-1 · of concrete made of quarry dust and results were compared with the control foam concrete. It is found that the compressive strength of foam concrete made of quarry dust are nearly 40 % more than the control foam concrete. replacement material to sand as fin. Keywords— Foam Concrete, Aerated concrete, Foaming agent, Bubbles.

  • [PDF] Use of Quarry Dust to Replace Sand in Concrete

    This experimental study presents the variation in the strength of concrete when replacing sand by quarry dust from 0% to 100% in steps of 10%. M20 and M25 grades of concrete were taken for study keeping a constant slump of 60mm. The compressive strength of concrete cubes at the age of 7 and 28 days were obtained at room temperature. Also the temperature effect on concrete cubes at 100 o C onEffect of Quarry Dust on The Physical Concrete,2011-2-13 · Quarry dust was used to replace 20% of sand in silica fume-quarry dust (SFQD) and silica fume (SF) concretes. Besides, silica fume was used as 10% replacement of cement in both SF and SFQD concretes. SFQD and SF concretes were prepared with normal portland cement (NPC) concrete. Slump, slump-flow and V-funnel flow were measured to indicate the

  • Stone Dust in Concrete: Effect on Compressive Strength

    2017-8-24 · found that the compressive and flexural strength of concrete made of Quarry Rock Dust are nearly 10% more than the conventional concrete (Suribabu et al., 2015). In the present study it is proposed to investigate the optimum replacement of river sand with stone dust for concrete in term of compressive strength performance at 7 days and 28 days. II.Influence of Quarry Dust on Compressive Strength of ,Objectives: In the present study, by-product of stone crushed, quarry dust is replaced as a fine aggregate with 20%, 30%, 40%, 50% replacement.Methods/Analysis: The fine aggregate is being replaced with fine aggregate and the compressive strength is determined for the concrete by testing the sample cube. The properties such as the specific gravity, fineness modulus, moisture content etc. are

  • THE EFFECT OF QUARRY DUST WITH CEMENT BY

    2018-11-19 · Hameed, and Sekar. (2009). Properties of Green Concrete Containing Quarry Rock Dust and Marble Sludge Powder as Fine Aggregate. Hmaid Mir, A. (2015). Improved Concrete Properties Using Quarry Dust as Replacement for Natural Sand. International Journal of Engineering Research and Development, 11(3): 46-56.“REPLACEMENT OF SAND BY QUARRY DUST IN CONCRETE”,2021-5-13 · cement concrete +quarry dust (M20 & M25). The experimental result showed that the additional of quarry dust as fine aggregate ratio of 30%, 40% and 50% was found to enhance the compressive properties. The compressive strength of concrete cubes at the age of 7 and 28 days were obtained at room temperature.

  • Stone Dust in Concrete: Effect on Compressive Strength

    2017-8-24 · found that the compressive and flexural strength of concrete made of Quarry Rock Dust are nearly 10% more than the conventional concrete (Suribabu et al., 2015). In the present study it is proposed to investigate the optimum replacement of river sand with stone dust for concrete in term of compressive strength performance at 7 days and 28 days. II.[PDF] Use of Quarry Dust to Replace Sand in Concrete ,This experimental study presents the variation in the strength of concrete when replacing sand by quarry dust from 0% to 100% in steps of 10%. M20 and M25 grades of concrete were taken for study keeping a constant slump of 60mm. The compressive strength of concrete cubes at the age of 7 and 28 days were obtained at room temperature. Also the temperature effect on concrete cubes at 100 o C on

  • [PDF] Utilization of Quarry Dust in Cement Concrete

    “A study of utilization aspect of quarry dust in Indian context” Natural river sand, if replaced by hundred percent Quarry Rock Dust from quarries, maysometimes give equal or better than the reference concrete made with Natural Sand, interms of compressive and flexural strength studies The strength of Quarry Rock Dust concrete is“Green Concrete: Using Industrial UGC Approved Journal,2013-10-31 · QUARRY DUST: The consumption of cement content, workability, compressive strength and cost of concrete made with quarry dust were studied by researcher Babu K.K. et al.[2]. The mix design was proposed by Nagraj et al. shows the possibilities of ensuring the workability by wise combination of rock dust and sand reported

  • Stone crusher dust as a fine aggregate in Concrete for

    2017-12-12 · ) is higher than the conventional concrete. The durability of quarry rock dust concrete under sulphate and acid action is higher than the conventional concret. Similarly water Absorption found to be more in the concrete containing crusher dust2. The overall workability value of quarry rock dust concrete in terms of slump as well asEFFECT OF FLY ASH AND QUARRY DUST AS A PARTIAL ,2018-11-5 · quarry dust also contains a similar property of river sand. quarry dust is used in concrete to minimize the demand of river sand. maximum exploitation of sand is to be minimized to protect the river beds, shore structures from erosion. to reduce disposal and pollution problems emanating from these industrial wastes,

  • Research Articles Challenge Journal of Concrete

    Ho DWS, Sheinn AMM, Ng CC, Tam CT (2002). The use of quarry dust for SCC Applications. Cement and Concrete Research, 32, 505–511. Kumar NVS, Rao PB, Sai MLNK (2013). Experimental study on partial replacement of cement with quarry dust. International Journal of Advanced Engineering Research Studies, 3, 136–137. Manju P et al. (2014).,